Roco multiZENTRALEPRO Manuel page 66

The Menu Functions of the multiMAUS
The multiMAUS PRO has four main menus with which you can both perform comprehensive programming and change
the basic settings of the multiMAUS
Press the "MENU" key alone for approximately 5 seconds (the duration can be set in the "SETTINGS" menu),
▪
practical when using the multiMAUS
Press the Shift and "MENU" keys simultaneously.
▪
Either way the last used menu is opened. This is the "LOCO" menu when using the multiMAUS
first time. A scrolling text program integrated into the multiMAUS
5 letters as scrolling text.
The display images in this manual depict the menu as an abbreviation with the complete name being shown directly
below the image.
Start location:
Normal Operation
LOCO
You use one of the "arrow keys" to continue in the menu level. You use the "Light /OK" key to call up the respective
submenu. The menus are all numbered. The numbers are shown at the bottom of the display.
Each of the four large main menus has its own pictograms for clear identification. They appear in addition to the
word "MENU". You will also find them in the respective submenus:
Menu 1 "LOCO": Symbol "
▪
Menu 2 "PROGRAM": Lettering "Prog"
▪
Menu 3 "SETTINGS": Symbol "
▪
Menu 4 "ROUTES": Symbol "
▪
66
66
Part 3
▪
PRO
PRO . This menu level can be accessed using two simple key combinations:
PRO with one hand.
or
or
Hold for appr. 5 seconds
PROGRAM
"
"
"
Menus
displays all the menu names with more than
PRO
or
SETTINGS
is used for the
PRO
ROUTES