Table des Matières
Publicité
A.2.1.9
Certificats et homologations
Tableau A-8
Marquages
Tableau A-9
Marquages
Engineering Conditions of Acceptability
For use only in or with complete equipment where the acceptability of the combination is
determined by ULLLC. When installed in an end-product, consideration must be given to the
following:
• Reference temperatures on the unit enclosure were measured during heating test. The max
obtained temperature with condition C at Enclosure I was 81.5 °C. See chapter
"AUTOHOTSPOT" Additional Information for normal load condition details.
• The unit is completely encapsulated. Potting improve mechanical and thermal properties of
the unit.
• The following Production-Line tests are conducted for this product: Electric Strength,
Earthing Continuity
• The end-product Electric Strength Test is to be based upon a maximum working voltage of:
Primary-Earthed Dead Metal: 300 Vrms, 342 Vpk; Primary-SELV: 300 Vrms, 613 Vpk
• The following secondary output circuits are SELV: 24 Vdc output of the unit.
• The following secondary output circuits are at non-hazardous energy levels: 24 Vdc output.
SIMATIC RF300
Manuel système, 02/2021, C79000-G8977-C345-09
Homologations pour adaptateur secteur à large plage pour systèmes SIMATIC RF (Europe,
Royaume-Uni) : 6GT2898-0AC00, 6GT2898-0AC10
Description
Homologation CE selon
•
2004/108/EG - EMC
•
2006/95/EG - Voltage directive
Homologation radio pour Russie, Biélorussie, Kazakhstan
Homologations pour adaptateur secteur à large plage pour systèmes SIMATIC RF (USA) :
6GT2898-0AC20
Description
Ce produit est certifié conforme à UL pour les États-Unis et le Canada.
Il satisfait aux normes de sécurité suivantes :
•
UL 60950-1
Information Technology Equipment - Safety - Part 1: General Requirements
•
CAN/CSA C22.2 No. 60950-1-07
Safety of Information Technology Equipment.
•
cURus +CB - UL/IEC 60950-1
and Limited power source under UL 1310
•
UL Report E 205089
Pièces jointes
A.2 Accessoires
453
Publicité
Table des Matières
