Wiring On An 8400 With M12, 5-Pin Fixed Connector And Transistor Output - Burkert 8400 Manuel Utilisateur

Masquer les pouces Voir aussi pour 8400:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Strip 20 mm of the cable.
5
Cut the central wire (earth) so that its
length is equal to 11.5 mm.
Expose 5.5 mm of the wires on the
stripped cable.
Insert each wire into the appropriate pin
on the terminal block [5] (see chap. 7.3.2
and 7.3.3 ).
Tighten the terminal block [5] wired to
the body [4]
Tighten the connector nut [1].
Fig. 8:
Assembling an M12 female connector (not provided)
7.3.2.
Wiring on an 8400 with m12, 5-pin
fixed connector and transistor
output
PNP transistor output
3
4
(*)
5
1
2
V+ (12 - 30 VDC)
NPN transistor output
Fig. 9:
Assignment of the pins on the M12, 5-pin fixed connector
on a version with transistor output
16
0 VDC
(*) Functional earth
english
Type 8400
Installationandwiring
pin for the m12 female cable available as
optional equipment (order code 438680)
1
2
3
4
5
The M12, 5-pin fixed connector is adjustable:
Unscrew the locknut.
Do not turn the fixed connector by more than 360° so as not
to twist the cables inside the housing
Turn the fixed connector until it is in the desired position.
Tighten the locknut using a spanner, while keeping the fixed con-
nector in the desired position.
4
3
blue
white
5
2
1
1A
+ -
Power supply
12-30 VDC
Fig. 10:
Wiring an NPN transistor output
colour of the
conductor
brown
white
blue
black
grey
Charge

Publicité

Table des Matières
loading

Table des Matières