Installation And Wiring; Safety Instructions - Burkert 8400 Manuel Utilisateur

Installationandwiring
7.

insTAllATion And WiRinG

7.1.

safety instructions

danger
Risk of injury due to high pressure in the installation
• Stop the circulation of fluid and depressurize the pipes before
loosening the process connections.
Risk of injury due to high fluid temperatures.
• Use safety gloves to handle the device.
• Stop the circulation of fluid and depressurize the pipes before
loosening the process connections.
Risk of injury due to the nature of the fluid.
• Respect the regulations on accident prevention and safety relat-
ing to the use of aggressive fluids.
Risk of injury due to electrical voltage
• Before starting work, make sure that you switch off the supply
voltage and secure it to prevent restarting.
• Do not unscrew the cover of a powered device.
• Observe all applicable accident protection and safety guidelines
for electrical equipment.
Type 8400
Warning
Risk of injury due to non-conforming installation.
• The electrical and fluid installation can only be carried out by
qualified and skilled staff with the appropriate tools.
• Install appropriate safety devices (correctly rated fuse and/or
circuit-breaker).
• Respect the assembly instructions for the fitting used.
Risk of injury due to unintentional switch on of power supply
or uncontrolled restarting of the installation.
• Take appropriate measures to avoid unintentional activation of
the installation.
• Guarantee a set or controlled restarting of the process subse-
quent to any intervention on the device.
• To ensure that the device runs correctly, plug in and
tighten the connectors.
• Check the chemical compatibility between the fluid to
be measured and the materials from which the device is
made exposed to it
english
13