Burkert 8400 Manuel Utilisateur page 80

transmitter
message
4-20 mA
displayed
output value
ERR 10* 22 mA
ERR 11* 22 mA
ERR 15* 22 mA
ERR 20* 22 mA
* only for 8400 transmitters.
38
meaning
The current sent by the controller during adjustment
of the 4-20 mA input is out of range.
OFFSET < 3 mA or OFFSET > 5 mA
SPAN < 18,5 mA or SPAN > 21,5 mA
The current emitted by the transmitter during
adjustment of the 4-20 mA output is out of range.
OFFSET < 3 mA or OFFSET > 5 mA
SPAN < 18,5 mA or SPAN > 21,5 mA
The device operates with the previous adjustment
values.
Read error: the process is stopped.
The expansion board calibration data is lost.
The device uses the default configuration.
The connection with the expansion board is
stopped.
english
Type 8400
Maintenanceandtroubleshooting
What to do
→
Check the current sent by the controller.
→
Press the ENTER key to go back to Simulation mode.
→
Press the ENTER key to go back to Simulation mode.
→
Press the ENTER key to go back to Read mode.
→
Reconfigure the device (see chap.
functionalities).
If the error persists, contact your Bürkert supplier.
→
Contact your Bürkert supplier.
9.Adjustment and