Timer Function - Atag HI9071M Manuel D'utilisation

timer
timer

timer function

timer function
The appliance is fitted with a clock that can be used as a
cooking timer. This cooking timer is then independent and
has no effect on the settings of the cooking zones.
1
Switch to the cooking timer by pressing once on
the button.
2 Select the desired time (max. 3.59 hours) by pressing the
+ and – buttons. By keeping these buttons pressed
longer, the time will increase or decrease in larger and
larger steps.
The selected time is shown in the display.
3 When the selected time has expired, the hob starts
beeping. This beep can be switched off by pressing the
button. You can set a new time again by pressing the
+ button again immediately. You do not have to switch
the timer off first.
You can have a cooking zone switched off by the cooking
timer. The left cooking timer operates both left cooking zones
and the right cooking timer operates both right cooking
zones.
1
Put a pan on a cooking zone.
2
Switch the cooking zone on.
The appliance starts to work.
3 Switch the cooking timer on with the
Press the button
The lamp next to 'FRONT' (for the front zone) or 'REAR'
(for the rear zone) comes on. The cooking time is set
using the + and – buttons (max. 3.59 hours).
The number of minutes selected is shown in the display.
switching on
for the timer function again.
operation
button.
GB 13