Cooking Information; Settings And Power Levels; Two Zones - Atag HI9071M Manuel D'utilisation

cooking information

settings and power levels

power

two zones

You will hear a ticking
sound if two cooking
zones one in front of
the other are
switched on at the
same time. This is
caused by the
appliance switching
over from the rear
cooking zone to the
front one and back
again.
Zones one in front of
the other affect each
other.
Zones alongside
each other can
both be set to a
high setting at
the same time.
GB 20
The power can be set from 50 W to 3.6 kW (see table on
page 17).
Two cooking zones one in front of the other are operated by
one generator. The advantage of this is that a high power level
can be realised for a cooking zone. This is ideal for bringing
food and liquids to the boil very quickly, for frying and for
searing large quantities.
When both of these cooking zones are switched on at the
same time, the power is automatically shared between them.
Up to setting 10, this does not have any consequences.
If, however, you set one cooking zone to setting 11 or
other cooking zone will automatically switch down to setting
6 or 7.
Two cooking zones alongside each other have no effect on
each other. So you can set them both to a high setting at the
same time.
the