Cooking-Timer/Alarm; Automatic Boost Function - Atag HI6271E Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

OPERATION

Cooking-timer/alarm

04
11

Automatic boost function

A cooking-timer can be set for each cooking zone. The hob also has
an alarm. Both the cooking-timer as well as the alarm can be set for
a maximum of 99 minutes. The alarm works in the same way as the
cooking-timer, but is not linked to a cooking zone. If the alarm has been
set, it will continue counting down after the hob has been switched off.
The alarm can only be switched off when the hob is switched on.
Setting the cooking-timer
1. Select the desired cooking zone and set the power level.
2. Press the timer/kitchen timer button (11).
3. Use the slide control or the timer/kitchen timer button to adjust the
desired time.
Using the timer/kitchen timer button the time can be adjusted in
intervals of 10 minutes. The time is shown in the timer display (04).
The selected cooking zone will switch off automatically once the set
time has elapsed.
Setting the kitchen timer
1. Press the timer/kitchen timer button (11).
Make sure that all the cooking zones are switched off.
2. Use the slide control or the timer/kitchen timer button to adjust the
desired time.
Using the timer/kitchen timer button the time can be adjusted in
intervals of 10 minutes. The time is shown in the timer display (04).
An alarm signal will sound once the set time has elapsed.
All cooking zones are equipped with an automatic boost function.
If the automatic boost function is activated the cooking zone will
automatically heat up using the maximum power and will then switch
back to the cooking level selected by you. The boost time depends on
the selected cooking level (level 1 to 8).
Switching on
1. Place the pan in the middle of a cooking zone.
2. Press the On/Off button (14).
A single beep sounds.
EN 13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hi7271e

Table des Matières