Electrical Connection - Atag HI9071M Manuel D'utilisation

Power setting table
Type of hob
Component voltage
Appliance width x depth
Installation height from
top of worktop
Cut out dimensions width x depth 860x 490 mm
Capacities of modules
Left
Middle
Right
For the connection, use an approved cable, in
accordance with the regulations. The cable must bear
one of the following indications:
H05V2V2-F, H05RR-F or H05RN-F.
There is a label on the underside of the appliance with
the wiring diagrams. The connection terminals are
accessible once you have opened the junction box on
the underneath. The junction box cover can be
opened with a screwdriver.
If you want to make a fixed connection, make sure
that a multi-polar switch with a contact separation of
at least 3 mm is fitted in the supply line.
Induction
230V 50Hz
904X 522 mm
48 mm
3600 W
2800 W
2800 W
installation

electrical connection

GB 31