Cooking-Timer/Alarm - Atag HI06471D1 Mode D'emploi

OPERATION

Cooking-timer/alarm

EN 10
A cooking-timer can be set for each cooking zone. The hob also has
an alarm. Both the cooking-timer as well as the alarm can be set for
a maximum of 99 minutes. The alarm works in the same way as the
cooking-timer, but is not linked to a cooking zone. If the alarm has been
set, it will continue counting down after the hob has been switched off.
The alarm can only be switched off when the hob is switched on.
Setting the cooking-timer
• Select desired cooking zone and set the power level.
• At the same time press the – and + button (E).
The timer setting is displayed in the top two displays (H). The
bottom two displays have been switched off.
• The timer setting is visible for 10 seconds, after which the power
setting is displayed.
Select the desired function:
1. Cooking-timer — the timer is linked to a cooking zone. After the
set time has elapsed, the cooking zone will switch off automatically.
2. Alarm — the alarm only beeps after the set time has elapsed.
The alarm works in the same way as the cooking-timer, but is not linked
to a cooking zone. If the alarm has been set, it will continue running
after the hob has been switched off. The alarm can only be switched off
when the hob is switched on.
Switching on the cooking-timer, activating and switching off
• Press simultaneously the – and + button (E).
▷ If you have switched on a cooking zone (C) prior to this, the
accompanying display will be brighter. The cooking-timer that
you have now set applies to this cooking zone. The decimal
point next to the power level means that the time has been
activated for this zone.
▷ The alarm can also be activated without a cooking zone being
selected. Two flashing decimal points indicate that the alarm is
counting down.
• Set the cooking time using the – or + button (E). (When you press
'-', the time will be set for 30 minutes. If you keep the button
pressed the time will run faster).