Recognizing A Mode; Timer / Kitchen Timer - Atag HI3271W Mode D'emploi

OPERATION

Recognizing a mode

Timer / Kitchen timer

If you press the pause button again within 5 minutes, the paused
cooking process will be resumed.
A double beep will be heard, the hob resumes the settings as they were
set before the pause.
If you do not undertake any further action within 5 minutes:
The active cooking zone will be switched off automatically. After that the
pause button will keep flashing for 25 minutes to indicate the cooking
process has been ended by the pause mode. The hob automatically
switches from the pause mode to the eco stand-by mode after
25 minutes.
The stand-by mode
The eco stand-by mode
The childproof lock
mode
The pause mode
The timer/alarm clock button for the cooking zone has two functions:
The timer function
This function can be recognized
by a small red arrow pointing up.
The time increases in the timer
function.
The timer cannot be linked to the
cooking zone.
The timer function is activated by
pressing the timer button for
3 seconds.
Not a single light is lit.
The red light next to the childproof lock
button button keeps slowly going on and
off.
The red light next to the childproof lock
button is constantly on.
The red light next to the pause button
flashes.
The kitchen timer function
This function can be recognized
by a small red arrow pointing
down.
The time decreases in the kitchen
timer function.
The kitchen timer can be linked to
the cooking zone. This means the
cooking zone switches off when
the set time has passed.
The kitchen timer function can be
activated as follows: first activate
the timer function and then
activate the kitchen timer function
by pressing the + or - button.
EN 15