Connecting Flexible Duct From Blower To Filter Cabinet - Miller FILTAIR SWX-D Mode D'emploi

5-11. Connecting Flexible Duct From Blower To Filter Cabinet

Single Extraction Arm System
Dual Extraction Arm System
Tools Needed:
7/16 in.
2
4
3
Rotate right side
motor/blower
assembly 2255
clockwise. See
Section 5-10.
! Be sure flexible duct is securely
installed and does not leak.
.
To reduce pressure loss, support
flexible duct to eliminate bends.
Connecting One Blower to Filter
Cabinet
1 Filter Cabinet
2 Inlet Collar (See Section 5-3)
3 7 in. Flexible Duct
4 Band Clamp
Install flexible duct between blower ad-
apter and filter cabinet inlet. Secure duct
with supplied band clamps.
1
Connecting Two Blowers to Filter
Cabinet
Be sure backdraft dampers are installed
in filter cabinet (see Section 5-3).
Install flexible duct between blower
flanges and filter cabinet inlets. Secure
ducts with supplied band clamps.
OM-246877 Page 23
264 230-A