Connection Of Transmitter To Flowmeter Sensor - ABB CoriolisMaster FCB330 Mode D'emploi

5.6.3

Connection of transmitter to flowmeter sensor

FCT330, FCT350 transmitter to FCB330, FCB350, FCH330, FCH350 flowmeter sensor
Fig. 24
1 Equipotential bonding (PA)
Terminal Corresponding wire color
85 White
86 Brown
87 Green
88 Yellow
89 Black
90 Violet
IMPORTANT (NOTE)
The precise position of the PA terminals may vary according to the device type. Each terminal is marked accordingly. When the
FCT330, FCT350 transmitter is connected to the FCB330, FCB350, FCH330, FCH350 flowmeter sensor, the transmitter must
also be connected to "PA".
The following flowmeter sensor / transmitter combinations are permitted:
— FCB330, FCH330 flowmeter sensor with FCT330 transmitter
— FCB350, FCH350 flowmeter sensor with FCT350 transmitter
Function
Sensor 1
Sensor 1
Sensor 2
Sensor 2
Temperature
Temperature
CoriolisMaster FCB330, FCB350, FCH330, FCH350 | CI/FCB300/FCH300-X1 Rev. F EN - 25
Terminal Corresponding wire color
91 Gray
92 Pink
93 -
94 -
95 Blue
96 Red
Function
Driver
Driver
Not used
Not used
Temperature
Temperature