Sun Microsystems Netra CT 900 Guide D'administration Et D'utilisation page 95

PICMG Version 2.1
Hot Swap State: M4 (Active), Previous: M3 (Activation In
Process), Last State Change Cause: Normal State Change (0x0)
88: Entity: (0xa0, 0x60) Maximum FRU device ID: 0x00
Hot Swap State: M7 (Communication Lost), Previous: M4 (Active),
Last State Change Cause: Communication Lost (0x4)
92: Entity: (0xa0, 0x60) Maximum FRU device ID: 0x00
PICMG Version 2.1
Hot Swap State: M4 (Active), Previous: M7 (Communication Lost),
Last State Change Cause: Communication Lost (0x4)
96: Entity: (0xa0, 0x60) Maximum FRU device ID: 0x00
Hot Swap State: M7 (Communication Lost), Previous: M6
(Deactivation In Progress), Last State Change Cause: Communication
Lost (0x4)
20: Entity: (0xf0, 0x1) Maximum FRU device ID: 0x08
PICMG Version 2.1
Hot Swap State: M4 (Active), Previous: M3 (Activation In
Process), Last State Change Cause: Normal State Change (0x0)
Affichage des informations d'un contrôleur IPM spécifique
●
Dans l'exemple, les informations de base du contrôleur IPM à l'adresse 9C sont
affichées.
# clia ipmc 9c
IPM Sentry Shelf Manager Command Line Interpreter
9c: Entity: (0xd0, 0x0) Maximum FRU device ID: 0x08
PICMG Version 2.0
Hot Swap State: M4 (Active), Previous: M3 (Activation In
Process), Last State Change Cause: Normal State Change (0x0)
#
Affichage des informations détaillées du contrôleur IPM
●
Dans l'exemple, les informations détaillées du contrôleur IPM à l'adresse 9C sont
affichées.
# clia ipmc -v 9c
IPM Sentry Shelf Manager Command Line Interpreter
9c: Entity: (0xd0, 0x0) Maximum FRU device ID: 0x08
PICMG Version 2.0
Hot Swap State: M4 (Active), Previous: M3 (Activation In
Process), Last State Change Cause: Normal State Change (0x0)
Device ID: 0x00, Revision: 0, Firmware: 1.01, IPMI ver 1.5
Chapitre 3 Administration de votre système 73