Sun Microsystems Netra CT 900 Guide D'administration Et D'utilisation page 65

EXEMPLE DE CODE 2-1
# MAX_ALERT_STRINGS: This parameter specifies the number of available
entries
# in the PEF Alert String table. Default is 64.
#
MAX_ALERT_STRINGS = 64
# MAX_DEFERRED_ALERTS: This parameter sets the maximum number of outstanding
# PEF alerts. Default is 32.
#
MAX_DEFERRED_ALERTS = 32
# MAX_EVENT_FILTERS: This parameter specifies the number of available
entries
# in the PEF Event Filter table.
#
MAX_EVENT_FILTERS = 64
# MAX_OEM_FILTERS: This parameter specifies the number of available entries
# in the PEF OEM Event Filter table. Default is 16.
#
MAX_OEM_FILTERS = 16
# MAX_PENDING_IPMB_REQUESTS: The parameter sets the maximum number of
# pending IPMB requests awaiting response. Default is 192.
#
MAX_PENDING_IPMB_REQUESTS = 192
# MAX_SEL_ENTRIES: The parameter defines the SEL capacity in records.
# Default is 1024.
#
MAX_SEL_ENTRIES = 1024
# SEL_HIGH_WATERMARK: This parameter is the "high watermark" for the
algorithm
# algorithm that controls automatic SEL purging. The purging process will
# start when the actual percentage of free entries in SEL falls below this
# value or the SEL is full. During the purge the oldest SEL records are
# removed according their timestamp. Default is 10 percent i.e. start
# purging when SEL is full.
#
SEL_HIGH_WATERMARK = 10
# SEL_LOW_WATERMARK: This parameter is the "low watermark" for the algorithm
# that controls automatic SEL purging. When the SEL purging thread starts
# it removes records one by one until the percentage of remaining occupied
# entries in the SEL falls below this value. Default is 50 percent.
Fichier shelfman.conf par défaut (suite)
Chapitre 2 Configuration de votre système 43