Lap-Shoulder Belt; Securing Your Child; Harness Mode - Britax Frontier XT Guide D'utilisation

Positioning the Child Seat: Booster Mode
Firmly press the Versa-Tether
5
hook to the vehicle tether
anchor to attach. Remove all
slack from the tether webbing.
Use the elastic strap to contain
6
extra webbing.
* Always ensure any excess
webbing is contained within
your vehicle
Use the vehicle's lap-shoulder
7
belt to secure your child.

Lap-Shoulder Belt

Ensure that the positioning
1
block is rotated to the back.
Place the child seat on the
2
vehicle seat and use the
vehicle's lap-shoulder belt to
secure your child.
54
®
OR
OR
Positioning
Block

Harness Mode

WARNING!
• Never route the vehicle seat belt over the child when
using this child seat in harness mode.
• Adjust the belts provided with this child seat so they
fit snugly around your child. A snug strap should not
allow any slack. It lies in a relatively straight line without
sagging. It does not press on the child's flesh or push the
child's body into an unnatural position.
• The HUGS™ chest pads must be used at all times.
• Adjust the harness to fit the clothes the child is wearing.
Remove bulky coats and/or jackets before putting the
child in the child seat.
• Verify that the child seat is secure and the harness is
properly adjusted around the child each time the child
seat is used.
Before you begin:
Always check the seat area for debris and remove it to prevent
interference with the harness adjuster mechanism.

Securing Your Child

55