Programming The Modes; C.1.1 Voltage (Dc) Measurement - AOIP CP6632 Mode D'emploi

CP6632
C. P
ROGRAMMING THE MODES

C.1.1 Voltage (DC) measurement

•
Measurement or transmission mode is selected using key F2
(mode menu).
• Using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ), move down through the menu
to the Measurement field.
•
Press VAL to confirm.
It should be noted that Measurement mode is the mode selected by default.
•
The type of function (voltage or current) is selected using key F1
(Configuration menu).
• Using the navigation key (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ), go onto the Function field
•
Press VAL to confirm.
In the MEASUREMENT CONFIGURATION menu, go onto the Function
field using key F1.
•
Go into the Function menu by pressing F2.
20/47
P
ROGRAMMING THE MODES