AOIP CP6632 Mode D'emploi page 79

• Using the navigation key (↑ ↑ ↑ ↑ ), start the automatic incrementing phase
(according to the parameters programmed in the
CONFIGURATION/RAMP menu).
•
The voltage can be automatically decremented from the
programmed maximum value using the navigation key (↓ ↓ ↓ ↓ ).
•
The transmitted voltage can be manually incremented (according to
the parameters programmed in the CONFIGURATION/RAMP
menu) using the navigation key ( ).
•
The transmitted voltage can be manually decremented from the
maximum programmed value using the navigation key (    ).
The Hold key allows generation to be stopped and restarted
Ramp generation can be done step by step by pressing the navigation keys
) and automatic generation restarted with the navigation keys (↑ ↑ ↑ ↑
(    and
and ↓ ↓ ↓ ↓ ).
Current generation/predefined editing/valve test?
Valve test transmission mode is a mode that transmits predefined current
values (3.8; 4; 4.2; 8; 19; 20 and 21mA).
•
Press key F2 to display the edit menu.
• Using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ), select Predefined setpoints
mode and confirm (VAL key).
• Using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ), select the Valve test mode and
confirm (VAL key).
A transmission screen is displayed with a setpoint value of 3.8 mA.
•
Press the navigation keys (    and
setpoint value.
Current generation/predefined editing/% FS?
The "% FS" (percentage of full scale) transmission mode transmits predefined
current values: 0%, 25%, 50%, 75% and 100%.
•
Press key F2 to display the edit menu.
• Using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ), select Predefined setpoints
mode and confirm (VAL key).
• Using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ), select %FS mode and confirm
(VAL key).
A transmission screen is displayed with a setpoint value of 0.00%.
•
Press the navigation keys (    and
setpoint value.
) to increment or decrement the
) to increment or decrement the
29/47