C.1.2 Current (Dc) Measurement - AOIP CP6632 Mode D'emploi

CP6632

C.1.2 Current (DC) measurement

•
Measurement or transmission mode is selected using key F2
(mode menu).
•
Using the navigation keys, go onto the Measurement field.
•
Press VAL to confirm.
It should be noted that Measurement mode is the mode selected by default.
•
The type of function (voltage or current) and the range are selected
using key F1 (Configuration menu).
•
Using the navigation key, go onto the Function field
•
Press VAL to confirm.
•
In the MEASUREMENT CONFIGURATION menu, go onto the
Function field using key F1.
•
Go into the Function menu by pressing F2.
• Select the type of function (Idc) using the navigation keys (↑ ↑ ↑ ↑ and
↓ ↓ ↓ ↓ ).
•
Press VAL to confirm.
The navigation keys can be used to make a shortcut. In the
MEASUREMENT CONFIGURATION menu, go onto the Function field
using key F1:
• Select the type of function (Idc) using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ),
22/47
P
ROGRAMMING THE MODES