C.1.4 Voltage Or Current (Dc) Transmission - AOIP CP6632 Mode D'emploi

CP6632

C.1.4 Voltage or current (DC) transmission

•
Transmission mode is selected using key F2 (mode menu).
• Using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ), move down through the menu
to the Transmission field.
•
Press VAL to confirm.
After confirming Transmission mode, the type of generation must be defined:
•
Continuous (manual or incremental editing).
•
Incremental (in steps).
•
Single ramp (only one ramp signal transmitted).
•
Cyclic ramp.
26/47
P
ROGRAMMING THE MODES