AOIP CP6632 Mode D'emploi page 73

•
Using key F1, go onto the Range field and define the Range.
•
Go into the menu by pressing F2.
•
Select the range using the navigation keys (0/20mA, 4/20mA or
25mA).
•
Press VAL to confirm (the range).
The navigation keys can be used to make a shortcut. In the
MEASUREMENT CONFIGURATION menu, go onto the Range field using
key F1:
•
Select the range directly using the navigation keys (
Other configuration parameters can be defined at this level, such as the
current loop supply, the type of scale and Hart compatibility. These
parameters are defined in the next chapter.
•
Press VAL (again) to confirm the desired function and call up the
measurement screen.
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓
and ),
23/47