Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CP6632
•
The various parameters are adjusted using the navigation keys (↑ ↑ ↑ ↑
and ↓ ↓ ↓ ↓ ).
•
Use the navigation keys ( and
next.
•
Press VAL to confirm.
D.3 Adjusting the "preferences"
D.3.1 Adjusting the filtering
When measurements are taken on a noisy loop, the measurements can be
filtered to render more stable the value indicated on the display.
•
This menu is accessed using key F1 (configuration menu).
•
Select the Setup field using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ), then
confirm.
•
Select the Preferences field using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ),
then confirm.
•
Select the Filtering field by pressing F1.
•
Four filtering values are available (OFF, 0.5s, 1s and 2s). The value
is selected using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ).
•
Press VAL to confirm.
D.3.2 Adjusting display resolution
The display resolution can be selected from the CONFIGURATION/ SETUP/
PREFERENCE menu:
•
This menu is accessed using key F1.
•
Select the Setup field using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ), then
confirm.
•
Select the Preferences field using the navigation keys (↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ),
then confirm.
•
Select the Resolution field by pressing key F1.
38/47
P
ARAMETER SETTINGS
) to move from one field to the
Publicité
Chapitres
Table des Matières
