AOIP CP6632 Mode D'emploi page 83

The CONFIGURATION/RAMP menu is accessed using key F2.
Important: The appropriate function mode (INCREMENTS mode) must
have been programmed in order to to access the
CONFIGURATION/RAMP/SINGLE menu.
Use key F2 to move from one field to the next in the
CONFIGURATION/RAMP/SINGLE menu.
The value is entered using the navigation keys:
•
As a percentage of the range if scaling mode is ON.
• ↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ to increment or decrement the value
•
    and
hundreds/tens/units/tenths/hundredths/thousandths.
Press VAL to save the parameters.
Press CLEAR to quit the menu without saving.
to select the
33/47