AOIP CP6632 Mode D'emploi page 85

The CONFIGURATION/RAMP menu is accessed using key F2. Caution, it is
vital to have programmed the appropriate function mode (Single Ramp
mode) to access the CONFIGURATION/RAMP/CYCLIC RAMP menu.
Use key F2 to move from one field to the next in the
CONFIGURATION/RAMP/CYCLIC RAMP menu.
The value is entered using the navigation keys:
•
As a percentage of the range if scaling mode is ON.
• ↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ to increment or decrement the value
•
    and
hundreds/tens/units/tenths/hundredths/thousandths.
Press VAL to save the parameters.
Press CLEAR to quit the menu without saving.
to select the
35/47