General; A.1 Introduction; A.2 The Instrument - AOIP CP6632 Mode D'emploi

CP6632
A. G
ENERAL

A.1 Introduction

The CP6632 is a hand-held process calibrator (conforming to EC standards
directive 2004/108/CE). It is more particularly intended for calibration and
maintenance. It can measure and generate electrical quantities either on site
or in the laboratory. It fulfils voltage and current measuring and generation
functions (DC or LF ramp signals) and a continuity test (on passive loop).
Owing to its monitoring (regulation) mechanism in transmission mode, the
instrument cannot take measurements and transmit simultaneously.
The CP6632 features numerous associated functions that extend its range of
applications:
•
Display of results in accordance with a linear conversion law or not.
•
Generation of increments, single or cyclic ramp signals.
Its utilisation is facilitated by a series of improvements:
•
Fast access to all the functions.
•
Intuitive user interface.
•
Graphic display of 160x160 pixels
•
Connection by 4-mm safety sockets.
•
Powered by 4 AA batteries or a rechargeable battery pack with fast
internal charger (Option).
The instrument is enclosed in an ABC casing with an optional elastomer
sheath.

A.2 The instrument

General characteristics:
•
Hand-held instrument energized by 4 AA batteries (1.7 Ah Ni-MH
battery pack on option).
•
Autonomy: from 12 to 53 hours depending on the functions used.
•
Wrist-strap for carrying and use on sites
•
Graphic 160 x 160 pixel liquid crystal display (LCD).
•
Choice of language of the messages and programming functions,
ranges and parameters on 6-key keypad + 1 navigator.
•
Display backlighting accessible via the keypad, with the possibility of
programming automatic extinction after a given period of inactivity.
•
Presentation: ABS casing (elastomer sheath on option).
•
Dimensions: 157 mm x 85 mm x 45 mm (without sheath).
•
Weight: 306 g without sheath.
•
Sealing IP54 in accordance with standard EN 60529
6/47
G
ENERAL