General; Introduction; A.2 Definition Of The Range; A.3 Parts - AOIP TC6621 Mode D'emploi

TC-TM 66XX
A. GENERAL
A.1

Introduction

The TC-TM66XX range is made of 5 temperature measurement and/or calibration devices for thermocouples and resistive
sensors. They are especially designed for calibration and maintenance. It makes it possible to measure and to emit
electrical measurements and to simulate temperatures both on site as well as in a laboratory.
The TC-TM66XX range features a large number of related functions which extend its range of application, including:

Generation of default values, increases, single or cyclic ramps (for TC6621 and TC6622).

Storage of acquisitions and display in the form of tables or trend curves.

Use of calibrated sensors with their coefficients of correction
A range of improvements facilitates its operation:

Rapid access to all functions.

Intuitive user interface.

160x160 graphic display

Connection via 4 mm safety plugs or a miniature flat plug.

Connection via 4 mm safety plugs or miniature flat plugs for thermocouple temperature calibrators and
connection by 4 mm safety plugs or 4-pt circular connector for resistive sensor temperature calibrators.

Power supply via 4 AA batteries or rechargeable batteries with internal charger (Option).
The units are fitted in an elastomer-sheathed ABS case.
A.2 Definition of the range
The range is detailed in the table below:
Thermocouple
measurement
TC6621
TC6622
TM6602
TM6612
TM6630
A.3 Parts
General characteristics:

Portable device powered by 4 AA batteries (pack of Ni-MH storage batteries, 1.7 Ah optional).

Hand strap for carrying and use on-site

Graphic liquid crystal display: 160 x 160 pixels.

Choice of language used for messages and programming of functions, gauges and parameters via 6-key
keyboard + 1 navigator.

Backlit display accessible via a keyboard key, with the possibility of automatic black-out after a specific
programmable period of inactivity.

Appearance: ABS case (elastomer-sheathed).

Size: 157 mm x 85 mm x 45 mm (without coating).

Weight: 306 g without coating.

IP54 tightness in compliance with standard EN 60529
Options:
Part No.
AV 6909
AN 6011
ER 48519-000
S101D/S101D
S102D/S102E
T101, T102, T103
58 / 101 NTA47230-300A6
Thermocouple
emission
X X
X
X
Name
Protective sheath
Pack of batteries + charger
USB cable
Ambiant sensor -10°C/+200°C
Unbending immersion sensor
Thermocouple K sensors
Resistive sensor Resistive sensor
measurement simulation
X
X
X

GENERAL

X