Drain Oil; Remove Or Dispose Of The Compressor And Other Components - Bitzer LHL3E/2EES-2Y Instructions De Service

10.3 Drain oil

Refer to the Operating Instructions for compressor and
oil separator.
Dispose of waste oil properly!
CAUTION
When the system has been in operation, the
temperature of the oil in the compressor and in
the oil separator may be over 60°C.
Serious burns are possible.
Before performing any work on the condensing
unit: switch off the system and allow it to cool
down.
10.4 Remove or dispose of the compressor and
other components
Remove the refrigerant and the oil (see above). Dis-
posal of individual components or of the complete con-
densing unit:
• Close open connections gas-tight (e.g. shut-off
valves, flange, screwed joints).
• If necessary, transport heavy components with hoist-
ing equipment.
• Have the components repaired or dispose of them
properly.
KB-206-2 81