Display - Bitzer LHL3E/2EES-2Y Instructions De Service

8.1.2

Display

The user interface consists of a display or input field in
the middle and three status bars at the top, right and
bottom sides of the display.
Status bar at the top and right sides of the display:
Symbol
☼ +
☼ +
❅ +
❅ +
Status bar at the bottom of the display:
Symbol
①
②
③
④
⑤
⑥
⑦
58
Function in the main display
• Alarm active
• Display of high pressure in bar
• Display of high pressure as condensing temperature in °C
• Display of suction pressure in bar
• Display of suction pressure as evaporation temperature in °C
Function in the main display
Compressor status
Flashing = compressor will start in a few seconds
On = compressor in operation
Off = compressor not in operation
Status of CR II solenoid valve 1
On = cylinder bank deactivated
Off = cylinder bank activated
Status of CR II solenoid valve 2
On = cylinder bank deactivated
Off = cylinder bank activated
Status of condenser fan(s)
On = condenser fan(s) in operation
Off = condenser fan(s) not in operation
Status of liquid solenoid valve (external)
On = liquid solenoid valve switched on
Off = liquid solenoid valve switched off
Operation mode condenser fan(s)
On = operation mode LowSound activated
Off = operation mode Eco activated
Status of fault message relay
On = fault active
Off = no fault active
KB-206-2