Technical Data; Noise; Vibration Information - Meister MFW300 Manuel D'utilisation

9 – Technical data
Multi­tool
Item number
Model / Model number MFW300
Electrical data
Supply voltage
Mains frequency
Power consumption
No-load vibration
frequency
Physical data
Dimensions without
accessories and cable
(L × W × H)
Angle of oscillation
Weight without tools
Technical modifications reserved.
10 – Noise/

Vibration information

Health Hazard!
Accidental start-up of the multi-tool
can result in serious injury from the saw
blade.
- Wear ear defenders and appropriate
protective clothing when working.
The specified overall vibration value and
specified noise emission values were
measured in accordance with a normed
test procedure (EN 62841-1 &
EN 62841-2-4) and can be used to com-
pare one power tool with another. They
can also be used to establish a prelimi-
nary evaluation of the load.
5454380-Multifunktionswerkzeug-man.indd 73 5454380-Multifunktionswerkzeug-man.indd 73
WU5454380
230−240 V~
50 Hz
300 W
n = 15000 –
0
23000 min -1
308 x 63 x 99 mm
3.1°
1.6 kg
Measured according to DIN EN 62841-1;
EN 62841-2-4. Noise at the workplace
may exceed 85 dB(A), in which case
protective measures for the user are
required (wear suitable ear defenders).
- Wear ear defenders and appropriate
protective clothing when working.
• Sound pressure level L
• Sound power level L
• Uncertainty K:
Caution!
The vibrations and noise emissions gen-
erated when the power tool is actually
being used may deviate from the spec-
ified values depending on the manner
in which the power tool is used, and
specifically, on the basis of the type of
workpiece being machined.
Try to keep the load caused by vibra-
tion and noise as low as possible. Here
are some recommended measures to
reduce vibration exposure:
• wearing gloves when using the tool.
• limiting working time
• the use of accessories in good condi-
tion
• regular maintenance and cleaning of
the tool
• switching off the tool when it is not in
use
• avoiding overloading the machine
The above values are noise emission
values and therefore do not need to
present safe workplace values at the
: 80.3 dB(A)
pA
: 91.3 dB(A)
WA
3.0 dB(A)
73
08.03.21 11:20 08.03.21 11:20