Meister MFW300 Manuel D'utilisation page 74

same time. The correlation between
emission and noise pollution levels
can not reliably lead to a derivation on
whether additional precautionary meas-
ures are necessary or not.
Factors which may influence the par-
ticular level of noise pollution present at
the workplace include the specification
of the work space and the environment,
the duration of the actions, other sourc-
es of noise, and the like.
Please take into account possible devi-
ations in the national regulations for the
reliable workplace values. However, the
above information allows the user to
better estimate the hazard and risk.
Hand/arm vibration
Operation (sanding)
• Main handle a
• Auxiliary handle a
• Uncertainty K:
No-load running
• Main handle a
• Auxiliary handle a
• Uncertainty K:
CAUTION!
The above mentioned vibration emission
value was measured in accordance with
a normed test procedure standardised in
DIN EN 62841-1; EN 62841-2-4 and can
be used in order to compare one power
tool with another. It is also suitable for
the preliminary assessment of the vibra-
tion load. The actual vibration emission
value may, as described below, deviate
according to the type of use:
74
5454380-Multifunktionswerkzeug-man.indd 74 5454380-Multifunktionswerkzeug-man.indd 74
: 1.953 m/s 2
h
: 2.636 m/s 2
h
1.5 m/s 2
2
: 5.711 m/s
h
: 8.837 m/s 2
h
1.5 m/s 2
• Condition of the multi-tool or proper
maintenance,
• Type of material and use of the mul-
ti-tool,
• Use of the correct accessories and
their proper condition,
• firm hold of the multi-tool by the user,
• proper use of the multi-tool as
described in these operating instruc-
tions.
Improper use of the multi-tool can cause
vibration-related illnesses.
CAUTION!
Depending on the type of application
or the conditions of use, the following
safety measures must be observed to
protect the user:
- Try to avoid vibration as much as pos-
sible.
- Only use accessories that are in per-
fect condition.
- Use vibration-damping gloves when
using the multi-tool.
- Look after and maintain the multi-tool
according to these operating instruc-
tions.
- Avoid using the multi-tool in tempera-
tures below 10 °C.
- Plan your work steps so that you do
not have to use the strongly vibrating
multi-tool over several days.
08.03.21 11:20 08.03.21 11:20