Instrument Setup - MSA ALTAIR 5 Mode D'emploi

MSA
3.4.

Instrument Setup

The instrument allows the user to access and modify the following
parameters through direct button interface:
Calibration Options
•
Alarm Options
•
Instrument Options
•
These menus can be accessed only from the measure page by pressing
and holding the
a password.
The operation is as follows:
(1) Turn the instrument ON and wait until the measure page appears.
(2) Press the
The default password is "672".
•
Monochrome display
PASSWORD
(3) Enter the first digit by pressing the
with the button.
The cursor jumps to the second digit.
•
(4) Enter the second as well as the third digit.
Incorrect password: instrument returns to the Main Page.
•
Correct password: user can set the instrument options.
•
The password can be changed with a PC through the MSA Link
The following Options are available by pressing the
Calibration Options - see Section 3.4.1
•
Alarm Options - see Section 3.4.2
•
Instrument Options - see Section 3.4.3
•
US
and buttons simultaneously until you are prompted for
and buttons simultaneously.
000
ALTAIR 5 - Operating Manual
OPERATION
Color display
PASSWORD
000
or button and confirm
TM
software.
and buttons:
29