MSA ALTAIR 5 Mode D'emploi page 8

INSTRUMENT SAFETY
MSA does not recommend the use of sampling lines in monitoring for
•
reactive toxic gases (Cl
All instrument readings and information must be interpreted by someone
•
trained and qualified in interpreting instrument readings in relation to the
specific environment, industrial practice and exposure limitations.
Risk of explosion: Do not recharge instrument in hazardous area.
Do not replace batteries in hazardous area.
Observe proper battery maintenance
Use only battery chargers made available by MSA for use with this
instrument; other chargers may damage the battery pack and the unit.
Dispose of in accordance with local health and safety regulations.
Be aware of environmental conditions
A number of environmental factors may affect the oxygen sensor readings,
including changes in pressure, humidity and temperature.
Pressure and humidity changes affect the amount of oxygen actually
present in the atmosphere.
Be aware of the procedures for handling electrostatically sensitive
electronics
The instrument contains electrostatically sensitive components. Do not
open or repair the unit without using appropriate electrostatic discharge
(ESD) protection. The warranty does not cover damage caused by
electrostatic discharges.
Be aware of the product regulations
Follow all relevant national regulations applicable in the country of use.
Be aware of the warranty regulations
The warranties made by Mine Safety Appliances Company with respect to
the product are voided if the product is not used and maintained in
accordance with the instructions in this manual. Please protect yourself and
others by following them. We encourage our customers to write or call
regarding this equipment prior to use or for any additional information
relative to use or service
8
, ClO , NH ).
2 2 3
.
ALTAIR 5 - Operating Manual
MSA
US