MSA ALTAIR 5 Mode D'emploi page 35

MSA
Other operations such as changing the gas type (Methane, Butane,
Propane etc. for the combustible sensor) and units (ppm to mg/m
only possible using the MSA Link
(3) Change status by pressing the
(4) Press the
sensor).
(5) Perform the sequence for all other sensors.
After setting up the last sensor the instrument goes to the next
•
Setup Page.
Language Setup
This option is for setting the language of the instrument.
(1) Press the
(2) Change language by pressing the
(3) Confirm by the
The instrument goes to the next Setup Page.
•
Time and Date Setup
This option is for setting the instrument time and date. The instrument first
prompts to set the time and then it prompts for the date.
The time can be set up for either regular AM/PM or military time
(through MSA Link
(1) Press the
(2) Change hours by pressing the
(3) Confirm by the
(4) Change minutes by pressing the
(5) Confirm by the
The instrument goes to the Set Date Page.
•
(6) Change month, date and year by pressing the
confirming with the
The instrument goes to the next Setup Page.
•
US
NOTICE
TM
button to confirm and advance to next screen (next
button to enter setup.
button.
NOTICE
TM
software). AM/PM time is the default setting.
button to enter setup.
.button.
button.
button.
ALTAIR 5 - Operating Manual
software.
or button.
or button.
or button.
or button.
or
OPERATION
3
) are
button and
35