Technical Data - Hilti DD-WMS 100 Mode D'emploi Original

You can connect a different diamond core drilling machine within the
connectivity range to the WMS 100:
1. Deactivate Bluetooth on the water treatment system currently connected
and then switch on Bluetooth again.
2. Restart the connection process to the other diamond core drilling machine.
The time frame for the connection to a different diamond core drilling
machine is approximately 2 minutes. When the 2 minutes have expired,
the connection process will be canceled.
License
Bluetooth is not available in all countries.
The Bluetooth word mark and the logo are registered trademarks and the
®
property of Bluetooth SIG, Inc. and Hilti has been granted a license to use
these trademarks.
4

Technical data

4.1 Water management system
For rated voltage, rated current, frequency and/or input power, refer to
the country-specific type identification plate.
If the tool is powered by a generator or transformer, the generator or
transformer's power output must be at least twice the rated input power
shown on the rating plate of the tool. The operating voltage of the transformer
or generator must always be within +5 % and -15 % of the rated voltage of
the tool.
Protection class
Protection class
Weight in accordance with EPTA procedure
01/2003
Weight of the hose set
Operating temperature
Recommended temperature range for trans-
port and storage (without water in the con-
tainer)
Suction hose length
Pressure hose length
Supply cord length
10 English
I
IPX4
43.4 lb
(19.7 kg)
4.0 lb
(1.8 kg)
37 ℉ ... 104 ℉
(3 ℃ ... 40 ℃)
−13 ℉ ... 158 ℉
(−25 ℃ ... 70 ℃)
16 ft
(5 m)
5.1 m
15 ft - 9 in
(4.8 m)
2154324
*2154324*