Technical Data; Inserting The Battery; Removing The Battery - Hilti VC 5-A22 Mode D'emploi

3.6 Indication of overloading and overheating
The power tool is equipped with an electronic system to protect against overloading and overheating. The
power tool switches itself off automatically in the event of overloading or overheating. After releasing the
control switch, the power tool may not restart immediately when the switch is pressed again (while the power
tool is cooling down).
4

Technical data

Rated voltage (DC)
Rated current input
Weight in accordance with EPTA-Procedure 01 (measured with B22⁄5.2)
Ambient temperature
Storage temperature
4.1 Noise and vibration information, measured in accordance with EN 60335-2-69
Sound pressure level (L
Sound power level (L
WA
Uncertainty
Vibration emission value (a
Uncertainty (K)
5 Operation
5.1 Preparations at the workplace
Observe the safety instructions and warnings in this documentation and on the product.
WARNING The appliance may be operated only by authorized, trained personnel.
5.1.1 Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery. → page 12
5.1.2

Inserting the battery

WARNING
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the product
are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the product until it engages with an audible click.
3. Check that the battery is seated securely.
5.1.3

Removing the battery

1. Press the battery release buttons.
2. Remove the battery from the tool.
5.1.4 Changing the filter bag
1. Switch the appliance off.
2. Open the two catches.
3. Lift the suction head off the waste material container.
14 English
)
pA
)
)
h
2
VC 5-A22
21.6 V
16 A
5.2 kg
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
VC 5-A22
70.9 dB(A)
85.2 dB(A)
2.4 dB(A)
< 2.5 m/s²
Is taken into account in
the stated value
2190975
*2190975*