Hilti DD-WMS 100 Mode D'emploi Original page 21

Masquer les pouces Voir aussi pour DD-WMS 100:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Attach the ratchet strap to the ratchet strap hook.
4. Use the ratchet strap to secure the toolboxes and prevent them slipping
out of place.
8.2 Storage
▶ Store the appliance in a secure, dry place where it is inaccessible to
unauthorized users.
9
Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable
to remedy the problem by yourself, please contact Hilti Service.
9.1 Troubleshooting
Malfunction
The MAX service
indicator lights up.
The MIN service
indicator lights up
and a warning tone
is emitted.
The No Filter service
indicator lights up.
*2154324*
Possible cause
Too much water in the
water and waste mate-
rial container.
The float is stuck.
Too little water in the
water and waste mate-
rial container.
The filter bag is missing
or is not fitted correctly.
2154324
Action to be taken
▶ Switch to
Water supply mode
until the MAX indicator
goes out.
▶ Check the float level.
→ page 14
▶ Fill the water and
waste material con-
tainer. → page 11
▶ Insert the filter bag.
→ page 11
English
15

Publicité

Table des Matières
loading

Table des Matières