Hilti DD-WMS 100 Mode D'emploi Original page 12

filter corresponding to the hazard classification of the dusts to be picked
up.
2.7 Use and care of the appliance
▶ Never leave the appliance unattended.
▶ Protect the appliance from frost.
▶ Clean the water level limiting device regularly with a brush, in accordance
with the instructions, and check it for signs of damage.
▶ When fitting the top section of the appliance, take care to avoid pinching
your fingers or damaging the supply cord. This presents a risk of injury
or damage.
▶ Check the appliance and its accessories for any damage. Guards, safety
devices and any slightly damaged parts must be checked carefully
to ensure that they function faultlessly and as intended. Check that
moving parts function faultlessly, without sticking, and that no parts are
damaged. In order to ensure faultless operation of the appliance, all parts
must be fitted correctly and must meet the necessary requirements.
▶ Have the appliance serviced by a qualified repair person using only
genuine Hilti spare parts. The safety of the appliance can thus be
maintained.
▶ Always unplug the supply cord from the power outlet when the appliance
is not in use (during breaks), before cleaning and maintenance and
before changing the filter or accessories. This preventive safety measure
reduces the risk of starting the appliance accidentally.
▶ Never use the power supply cord to pull the tool into a different working
position. Do not run over the power supply cord with the tool.
▶ Do not transport the appliance by crane.
3 Description
3.1 Product overview
Toolbox retaining bar
@
Handlebar
;
Ratchet strap
=
Gripping areas
%
Water and waste material con-
&
tainer
Hook for the ratchet strap
(
Suction hose inlet fitting
)
Water supply hose outlet fit-
+
ting
"Water level too low" warning
§
lamp
6 English
1
/
:
∙
$
£
|
¡
Q
W
"Water level too high" warning
lamp
"No filter" warning lamp
"Bluetooth" button and LED
(optional)
"Water supply" mode
"Vacuum cleaner" mode
"Off" mode
"Recycling" mode
Power outlet on the appliance
(optional)
Control switch
2154324
*2154324*