Personal Safety - Hilti DD-WMS 100 Mode D'emploi Original

Masquer les pouces Voir aussi pour DD-WMS 100:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

power outlet's earth/ground connection, have it checked by a qualified
specialist.
▶ Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, cookers, stoves and refrigerators. There is an increased risk of
electric shock if your body is grounded.
▶ Do not expose the appliance to rain. Water entering an electric appliance
will increase the risk of electric shock.
▶ Check to ensure that the supply cord does not lie in a puddle of water.
▶ Check the appliance's supply cord at regular intervals and have it
replaced by Hilti Service if damage is found. Check extension cords at
regular intervals and replace them if found to be damaged.
▶ Do not touch the supply cord or extension cord if they are damaged
while working. Disconnect the supply cord plug from the power outlet.
Damaged supply cords or extension cords present a risk of electric
shock.
▶ The electric supply cord may be replaced only with a cord of the type
specified in the operating instructions.
▶ Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the appliance. Keep the cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
▶ When operating an electric appliance outdoors, use only extension cords
of a type suitable for outdoor use. Use of an extension cord suitable for
outdoor use reduces the risk of electric shock.
▶ In the event of an interruption in the electric supply, switch the appliance
off and unplug it from the power outlet.
▶ Use the built-in power outlet only for tools with ratings in the range for
which the socket is rated.
▶ Never operate the appliance when it is dirty or wet. Dust (especially
dust from conductive materials) or dampness adhering to the surface of
the appliance may, under unfavorable conditions, lead to electric shock.
Dirty or dusty appliances should thus be checked by Hilti Service at
regular intervals, especially if used frequently for working on conductive
materials.

2.4 Personal safety

▶ Stay alert, watch what you are doing and use common sense when
operating the device. Do not use the tool while you are tired or under the
influence of drugs, alcohol or medication. A moment of inattention while
operating the tool may result in serious personal injury.
▶ The user and any other persons in the vicinity must wear suitable
eye protection, a hard hat, ear protection, protective gloves, safety
footwear and breathing protection while the appliance is in use or while
maintenance work on it is being carried out.
4
English
2154324
*2154324*

Publicité

Table des Matières
loading

Table des Matières