Bluetooth - Hilti DD-WMS 100 Mode D'emploi Original

Display icons
Flow of water
blocked
Water level too low
Unknown Error

3.8 Bluetooth

®
This product is equipped with Bluetooth (optional).
Bluetooth is a wireless data transfer system with which the two Bluetooth-
enabled products can communicate with each other over a short distance.
To ensure a stable Bluetooth connection, the interconnected products must
be within sight of each other.
Bluetooth functions of this product
• Automatic switch-on and switch-off of the water supply when drilling in
the modes Recycling
• Display of service messages on the screen of a connected diamond core
drilling machine.
Switching Bluetooth on or off
Hilti products ship ex-works with Bluetooth deactivated. Bluetooth
switches itself on automatically during initial operation.
•
To switch off, press and hold the
•
To switch on, press the
Connecting products
Connection to the diamond core drilling machine is maintained until the
diamond core drilling machine is connected to a different WMS 100, or
Bluetooth is switched off. The connection is also maintained after switching
the product off and on again, and the products reconnect to each other
automatically.
• To connect a Hilti diamond core drilling machine, press the Bluetooth
button with Bluetooth switched on.
*2154324*
Description
The free flow of water in the system is blocked. The
WMS 100 is not pumping.
Make sure that the water can flow freely from the
WMS 100 to the diamond core bit.
Too little water in the water and waste material con-
tainer. A functioning water supply is no longer en-
sured.
Fill the water and waste material container up to the
MAX mark.
The diamond core drilling machine has received an
unknown error code from the WMS 100.
Check the WMS 100 for faults and consult the oper-
ating instructions of the WMS 100 for a solution.
or Water Supply
button.
2154324
.
button for at least 10 seconds.
English 9