Hilti DD-WMS 100 Mode D'emploi Original page 14

3.5 Statuses of Bluetooth LEDs (optional)
Operat- LED status
ing but-
ton
LED off
LED pulsing
LED flashes
LED lights up continuously
3.6 Indicators
LED Description
The water level is too low.
Fill the water and waste material container up to the MAX
mark.
The water level is too high.
Switch to water supply mode until the indicator goes out.
No filter
Fit the filter bag fitted correctly.
3.7 Display symbols and explanations of multifunction display for
diamond core drilling machine (optional for Bluetooth)
For the following displays, the diamond core drilling machine must be ready
for operation (plugged in and PRCD switched on) and connected to the
WMS 100 via Bluetooth.
The displays may differ depending on the type of application.
Display icons
No filter
Water level too
high
8 English
Description
The filter bag is missing or is not correctly installed.
This WMS 100 is not ready for use.
Fit the filter bag fitted correctly.
Too much water in the water and waste material
container. The WMS 100 produces no vacuum.
Switch on the water supply mode until the MAX
service indicator goes out.
Description
Bluetooth is switched off.
Bluetooth is switched on.
No connection to another
device.
Bluetooth is switched on.
Coupling process is running.
Bluetooth is switched on.
Connected to another device.
2154324
*2154324*