Introduction; Machine Identification; Inspection On Delivery; Safety Requirements - Mecc Alte ECO-ECP Série Manuel D'instruction Et De Maintenance

Masquer les pouces Voir aussi pour ECO-ECP Série:

Table des Matières

Les langues disponibles

The ECO-ECP alternators comply with the EEC 2006/42, 2006/95,

2004/108 directives and their amendments; therefore they pose no

danger to the operator if they are installed, used and maintained

according to the instructions given by Mecc Alte and provided the

safety devices are kept in perfect working conditions.

Therefore a strict observance of these instructions is required.

Any reproduction of this manual is forbidden.

Always indicate the generator type and code when contacting Mecc

Alte or the authorized after sales service centres.

When the alternator is delivered, check that unit conforms with the

delivery note and ensure that there are no damaged or defective

parts; should there be any, please inform the forwarding agent, the

insurance company, the seller or Mecc Alte immediately.

Before any cleaning, lubrication or maintenance operation, ensure that

the generator is stationary and disconnected from the power supply.

When stopping the generator, ensure the compliance with the proce-

dures for stopping the prime mover.

The generator, in fact, has no Emergency Stop, but is controlled by

the device arranged by the installer.

ECO - ECP MANUAL

INTRODUCTION

ECO-ECP iMANUAL December 2013 Rev. 03

Table des Matières