Structure Of The Menu; Warning Indications - DAB e.sybox Instructions Pour L'installation Et L'entretien

GB
ENGLISH
Figure 14: Diagram of possible menu accesses
6.3 - Structure of the menu pages
When switched on, some presentation pages are displayed showing the
name of the product and the logo, after which the main menu appears.
The name of each menu, whichever it may be, is always at the top of the
display.
The following always appear on the main page:
Status: operating status (e.g. standby, go, Fault, input functions)
Revs per minute: value in [rpm]
Pressure: value in [bar] or [psi] depending on the set unit of measure.
Power: value in [kW] of the power absorbed by the device.
If the case occurs the following may appear:
Fault indications
81

Warning indications

Indications of the functions associated with the inputs
Specific icons
The error conditions are indicated in Table 2, page 76. The other displays
are indicated in Table 9.
Error or status conditions shown on the main page
Identifying code
Motor running
GO
SB Motor stopped
Motor status manually disabled
DIS
F1 Float function status / alarm
F3 System disable function status / alarm
F4 Low pressure signal function status / alarm
P1 Operating status with auxiliary setpoint 1
P2 Operating status with auxiliary setpoint 2
P3 Operating status with auxiliary setpoint 3
P4 Operating status with auxiliary setpoint 4
Com. icon with Operating status in multi-pump communication with the address
number indicated
Com. icon with E Error status of communication in the multi-pump system
Writing and reading the factory settings on EEprom
EE
WARN.
Low voltage Warning due to lack of supply voltage
Table 9: Status and error messages on the main page
Description