Caliper Brake Pad Removal - SRAM MTB Manuel De L'utilisateur

C a l i p e r B r a k e P a d R e m o v a l
1 Use a 5 mm hex wrench to remove the brake caliper from the fork or
frame.
Remove the caliper mounting bracket and hardware from the caliper
then set them aside in the order that they were removed.
2 Remove the E-clip from the pad retention bolt.
Remove the pad retention bolt from the caliper.
3 Remove the brake pads and pad H-spring from the caliper.
If the brake pad thickness is less than 3 mm, replace the pads.
NOT ICE
Needle nose pliers
Digital Caliper

Caliper Brake Pad Removal

2.5 mm
20 mm or 15 mm Thru Axle
10