Sony HSR-X216 Mode D'emploi page 81

SHIFT ↑ (54H)
Functions the same as counterclockwise rotation of the
Jog dial on the recorder.
Exceptions:
1. Increases the speed of playback in progress.
2. Increases values on a menu display.
TIMER ON/OFF (60H)
Turns on/off timer recording.
SHIFT → (63H)
Functions the same as clockwise rotation of the Shuttle
dial on the recorder.
SHIFT ↓ (64H)
Functions the same as clockwise rotation of the Jog
dial on the recorder.
Exceptions:
1. Decreases the speed of playback in progress.
2. Decreases values on a menu display.
PLAY SPEED UP (65H)
• Increases values on a menu display.
• Increases the playback speed in Playback mode.
PLAY SPEED DOWN (66H)
• Decreases values on a menu display.
• Decreases the playback speed in Playback mode.
SECURITY LOCK ON (69H)
Turns on the security lock when it is enabled (this
operation corresponds to that by holding the
SHUTTLE HOLD button pressed for 3 seconds on the
recorder).
MENU (74H)
• Sets the recorder to Menu mode.
• Selects the menu displays in Menu mode.
EXIT/OSD (76H)
• Turns on/off the on-screen data and changes the
display position.
• Cancels Menu mode.
Functions are the same as those of 8EH.
MULTI (82H)
Divides the display of the main monitor into 9 or 16
screens.
QUAD (83H)
Divides the display of the main monitor into 4 screens.
OPTION (84H)
Sets the display of the main monitor to a divided
screen mode including an option screen.
ZOOM (85H)
• Sets the zoom setting mode. Then, proceed as
follows:
1 Specify the horizontal position of the area to be
zoomed with SHIFT ↑ (54H) or SHIFT ↓ (64H).
2 Register the horizontal position with SHIFT →
(63H).
3 Specify the vertical position of the area to be
zoomed with SHIFT ↑ (54H) or SHIFT ↓ (64H).
4 Register the vertical position with SHIFT → (63H).
• Cancels Zoom mode.
FREEZE (86H)
Freezes the picture from the camera being monitored.
SEQUENCE (87H)
Automatically changes the displays of the main
monitor
MONITOR 2 (88H)
Selects the mode to set the submonitor.
ALARM RESET (8AH)
Releases alarm operation.
COPY (8DH)
Turns on/off the copy set display.
OSD/EXIT (8EH)
• Turns on/off the on-screen data and changes the
display position.
• Cancels Menu mode.
Functions are the same as those of 76H.
ALARM F (ABH)
Searches for the next alarm event in Playback mode,
and plays it back.
ALARM R (ACH)
Searches for the previous alarm event in Playback
mode, and plays it back.
REC STOP (CFH)
Stops recording.
CLOCK ADJUST (E0H)
Resets the minute and second settings of the built-in
clock to 00.
For example, when this command is sent between
13:30:00 and 14:29:59, the clock is reset to 14:00:00.
MENU RESET (E1H)
Resets the settings of the menu being displayed only.
81
(GB)