Storing Data On A Cd-R - Sony HSR-X216 Mode D'emploi

Data Storage

Storing Data on a CD-R

With a CD-R drive, you can store recorded picture data
on CD-Rs.
Note
• Pictures copied to a CD-R can be viewed by using
special software.
For the software, consult your Sony dealer.
• Pictures copied to a CD-R cannot be reloaded to this
unit.
When copying pictures to a CD-R, the pictures must
first be copied to the archive area.
For the procedure to copy to the archive area, see "Copying
Data to the Archive Area or a Memory Stick."
Pictures in the archive area can also be copied to a
Memory Stick using the same procedure.
1
Press the SEARCH button to call the SEARCH
menu ( ) highlight ARCHIVE AREA
page 48(GB)
SEARCH, and turn the Shuttle dial clockwise.
2
Select an event to be copied, and turn the Shuttle
dial clockwise.
3
When an image to start copying is displayed, press
the X PAUSE button to switch to Still-Picture
mode.
4
Press the COPY button.
The indicator of the COPY button lights, and the
copy set display is superimposed on the image.
5
Turn the Shuttle dial clockwise so that the COPY
TO line setting flashes, and turn the Jog dial to
select CD-R.
(To copy the data to a Memory Stick, select PC
CARD.)
Turn the Shuttle dial clockwise to finalize your
selection.
The HOW MANY line is highlighted.
6
Turn the Shuttle dial clockwise to specify the
quantity of images to be copied on the HOW
MANY line.
The figure input column flashes.
44
(GB)
Set the number with the Jog dial and turn the
(1)
Shuttle dial clockwise.
The unit column flashes.
Set the unit with the Jog dial and turn the
(2)
Shuttle dial clockwise to register the setting.
PICTURES: To specify the number in units of
picture frames
SECONDS: To specify the number in units of
seconds
MINUTES: To specify the number in units of
minutes
EVENTS: To specify the number in units of
events (selectable only when copying to a
CD-R)
To copy images until a CD-R becomes full
Set >60 EVENTS for HOW MANY.
You can select >60 only when you have selected
EVENTS for the unit. First select EVENTS for the
unit, then the number to >60.
COPY TO : ARCHIVE AREA
HOW MANY :
START
FORMAT PC CARD
CHANGE WITH JOG, SET WITH SHUTTLE
START is highlighted.
7
Turn the Shuttle dial clockwise.
Copying begins.
The progress status is displayed during copying.
When copying is completed, a completion message
is displayed, and the indicator of the COPY button
goes dark.
To stop copying in progress
Press the COPY button. The copy operation is
canceled.
>60 EVENTS
c
c