Saving/Loading Of Menu Settings - Sony HSR-X216 Mode D'emploi

Connections and Settings
4
Turn the Jog dial to choose YES, and turn the
Shuttle dial clockwise.
Formatting of the Memory Stick begins.
The progress status is displayed during formatting.
When formatting is completed, a completion
message is displayed, and the indicator of the
COPY button goes dark.
CD-R/DDS (Digital Data Storage) drive
Insert a commercially available FAST SCSI card into
the PC card slot on the rear panel.
If you connect a CD-R drive, you can copy picture
data to a CD-R.
A DDS drive (DDS-2 or DDS-3 type) can be
connected, enabling backup and restoration of data in
the archive area.
SCSI card: ADAPTEC SlimSCSI 1460 or equivalent
For a list of CD-R and DDS drives that can be used with
this unit, consult your Sony dealer.
HSR-X216/X209P/X216P
1 2 3 4
IN
OUT
MONITOR 1
S VIDEO
PC CARD
FAST SCSI card
56
(GB)
PC CARD
AUDIO IN AUDIO OUT
5 6 7 8 9 10 11
MONITOR 2
CD-R drive
SCSI
DDS drive
SCSI

Saving/Loading of Menu Settings

You can save the values you set with the menus on a
Memory Stick and load the stored values from the
Memory Stick to restore the menu settings.
Saving the menu settings
1
Insert a Memory Stick into the PC card adaptor set
in the PC card slot of this unit.
2
Display the main menu, then select 6. COPY
MENU SETTINGS.
The COPY MENU SETTINGS display appears.
<COPY MENU SETTINGS>
HDR TYPE VER. SY01-00
SAVE MENUS TO PC CARD
LOAD MENUS FROM PC CARD c
COPY RECORDING AREA SETTINGS: NO
* IF YOU COPY RECORDING AREA SETTINGS,
HARD DISK WILL BE INITIALIZED!
3
Turn the Jog dial to highlight SAVE MENUS TO
PC CARD, and turn the Shuttle dial clockwise to
advance to the next display.
A confirmation message is displayed.
4
Turn the Jog dial to choose YES, and turn the
Shuttle dial clockwise.
Saving begins.
The progress status is displayed during saving.
When saving is completed, a completion message
is displayed.
To cancel saving before beginnig the
operation
Turn the Shuttle dial counterclockwise.
Saving once started cannot be stopped.
c