Normal Recording; Settings For Normal Recording - Sony HSR-X216 Mode D'emploi

Normal Recording

Settings for Normal Recording

For normal recording, you may select an appropriate
picture quality, frame or field recording, audio
recording, and a recording cycle. Select the main
menu 2. RECORD SET, then the submenu
3. NORMAL REC MODE SET.
<NORMAL REC MODE SET>
PICTURE QUALITY
AUDIO RECORDING
REC RATE: 25 FPS (
REC PROGRAM GROUP
PICTURE QUALITY
Select an appropriate picture quality from among 5
levels. The default is HIGH.
HYPER: To record with 52 KB/field (including a
header of 2 KB)
SUPER: To record with 44 KB/field (including a
header of 2 KB)
HIGH: To record with 32 KB/field (including a
header of 2 KB)
MID: To record with 24 KB/field (including a header
of 2 KB)
LOW: To record with 17 KB/field (including a header
of 2 KB)
The lower the mode you select, the longer the possible
recording time becomes.
AUDIO RECORDING
To record an audio channel along with images, set
AUDIO RECORDING to ON.
Note
Audio recording can be activated when you select a
REC RATE value more than 10 FPS (HSR-X216) or
8.333 FPS (HSR-X209P/X216P).
REC RATE
Set the recording rate in FPS (fields per second).
For the table of recording rates and recording times, see
pages 33(GB) and 34(GB).
28
(GB)
: HIGH
: OFF
85H)
: OFF
REC PROGRAM GROUP
Choose one from among P-1 to P-4 to use particular
cameras for recording. Use all the connected cameras,
select OFF.
For setting P-1 to P-4, see the next paragraph.
Setting procedure
1
Display the main menu, then select 2. RECORD
SET.
2
Select 3. NORMAL REC MODE SET from the
submenu.
The NORMAL REC MODE SET display appears.
3
Turn the Jog dial to highlight the item to be set and
turn the Shuttle dial clockwise to finalize your
selection.
The current setting of the selected line flashes.
4
Turn the Jog dial to change to the desired setting
and turn the Shuttle dial clockwise to register the
new setting.
According to the selected picture quality and
recording rate, the possible recording time is
automatically calculated and displayed (in units of
hours) in parentheses at the right end of the REC
RATE line.
When you set AUDIO RECORDING to ON, "A"
is displayed before the REC RATE value if audio
recording is valid with the specified recording
cycle.
5
Press the EXIT/OSD button to exit the menu.