Camera Connections And Settings; Alarm Signal Connection - Sony HSR-X216 Mode D'emploi

Camera Connections and
Settings
Connect cameras to the camera connectors as in the
illustration on the previous page.
Detecting cameras
By activating the camera detection function in the
submenu 4. CAMERA DETECT of the main menu
1.INITIAL SET, the settings for unconnected cameras
are automatically set to OFF.
1
Select 1.INITIAL SET from the main menu.
2
Select 4.CAMERA DETECT and turn the Shuttle
dial clockwise.
A message for confirmation appears.
3
Select YES and turn the Shuttle dial clockwise.
The camera detection function is activated.
When detection is completed, the initial settings
such as the initial setting in the automatic
switching operation (page 25(GB)) are set to OFF.

Alarm Signal Connection

Outputtting alarm signals
Connect switching circuits such as indicator lamps to
the SENSOR ALARM OUT terminals. When the
internal alarm sensor (activity detection sensor) of this
unit sends a trigger, an indication such as an indicator
lightening is possible.
4.7 K
1 K
SENSOR ALARM OUT
Connecting external alarm sensors
Connect external alarm sensors such as a door bell or
an interphone to the terminals when you use an
external alarm input as a trigger for alarm recording.
External alarm sensors
for camera 16
for camera 15
for camera 14
for camera 13
for camera 12
for camera 11
for camera 10
for camera 9
for camera 8
for camera 7
for camera 6
for camera 5
for camera 4
for camera 3
for camera 2
for camera 1
ALARM IN
MIC
12 13 14 15 16
RS485
A B RS-232C
DO NOT CONNECT
PHONE LINE
Alarm input switching
-AC IN
5 6 7 8 9 10 11 12 13 14 15 16
SENSOR ALARM OUT
MON REC
ALARM WARNING
ALARM
C R1 R1 ALL OUT RESET FULL FULL C
ON
RS485
TERMINATE
OFF
C ALARM
OUT
53
(GB)