Web Operations Display - Sony HSR-X216 Mode D'emploi

5
Click on the radio button of the desired language
and click on SET.
The Web Operations display for the HSR-X216/
X209P/X216P (see below) appears.
When NETWORK CONTROL of NETWORK
SET ( ) has been set to ON (DISPLAY:
page 54(GB)
ON), a message "NETWORK CONTROL" is
displayed on the monitor screen connected to the
HSR-X216/X209P/X216P.
The operation that was in progress when logged on
is continued.

Web Operations Display

3 CHANNEL selection area
4 Operation buttons
The photo shows the display example for the HSR-X216/X216P.
Notes
• While the network is connected, operations on the
HSR-X216/X209P/X216P panel are disabled.
Operations will be enabled when the network is
disconnected.
• If communication with the PC is not detected for 2
minutes, the network is automatically disconnected.
To disconnect the network from the HSR-
X216/X209P/X216P
Hold the EXIT/OSD button pressed for more than 2
seconds.
1 Status display area
2 Image view pane
69
(GB)