Menu Settings - Sony HSR-X216 Mode D'emploi

Web Operations

Menu Settings

If you logged on with ID3, menu operations are
allowed.
Click on (MENU SETTING) to display the Menu
Select display and click on the menu item on the
display to select it.
Menu settings are achieved with selections from
dropdown lists and registration by clicking on SET or
SAVE.
1. CLOCK SET: To set the built-in clock of the HSR-
X216/X209P/X216P.
You can set it in the same procedure as with
LANGUAGE/CLOCK SET on the recorder on page
61(GB).
2. SUMMER TIME (DAYLIGHT SAVINGS) SET/
EXT. CLOCK SET: To perform the settings
required for the summer (daylight-savings) time and
external clock adjustment.
You can set the same items as with LANGUAGE/CLOCK
SET on the recorder on page 61(GB).
3. PROGRAM SET/PRE REVERSE: To specify the
program recording and the pre-reverse time.
You can set the same items as with PROGRAM REC SET
and PRE REVERSE on the recorder on page 29(GB) or
46(GB).
4. RECORDING AREA SET: To display the
information regarding the recording areas of the
built-in hard disk of the HSR-X216/X209P/X216P.
While you cannot change the area assignment via
the network, the AREA FULL RESET buttons are
valid.
Operate them in the same manner as with RECORDING
AREA SET on the recorder on page 63(GB).
5. RECORDING CONDITIONS SET: To set
OVERWRITE function, etc.
You can set the same items as with RECORDING
CONDITIONS SET on the recorder on page 64(GB).
6. NORMAL REC MODE SET: To set the
conditions for normal recording.
You can set the same items as with NORMAL REC
MODE SET on the recorder on page 28(GB).
76
(GB)
7. TIMER SET: To set the conditions for timer
recording.
You can set them with the same procedure as with TIMER
SET on the recorder on page 40(GB).
8. HOLIDAY SET: To specify holidays.
You can specify with the same procedure as with
HOLIDAY SET on the recorder on page 41(GB).
9. ALARM REC MODE SET: To set the conditions
for alarm recording.
You can set the same items as with ALARM REC MODE
SET on the recorder on page 35(GB).
10. ALARM DURATION SET: To set the duration
of alarm recording independently for each camera..
You can set the same items as with ALARM DURATION
SET on the recorder on page 37(GB).
11. DISPLAY SET: To turn on/off the on-screen data
items.
You can set in the same manner as with DISPLAY SET on
the recorder on page 64(GB).
12. RS-232C/RS-485 SET: To show the information
regarding external control settings on RS-232C/RS-
485 SET on the recorder
cannot be changed via the network.
13. BUZZER SET: To turn on/off the buzzers.
You can set the same items as with BUZZER SET on the
recorder on page 65(GB).
14. NETWORK SET: To show the information
regarding external control settings on NETWORK
SET on the recorder
(page 54(GB))
You can only select NETWORK SPEED from the
dropdown list.
15. HDD SET: To display the information regarding
the hard disk expansion set on HDD SET on the
recorder
(page 60(GB))
playback is allowed via the network.
16. POWER FAILURE/USED TIME: To display
the information of power failure, usage time, and
firmware version as POWER FAILURE/USED
TIME of the recorder
. The settings
(page 60(GB))
.
. Only selection of drive for
.
(page 78(GB))